Mineral insulated metal sheathed RTD Cable, RTD MIC, has a stainless steel or Inconel outer metal sheath with copper or Nickel signal wire conductors. The conductor lead wires are insulated from each other and the outer sheath by compacted magnesium oxide MgO. Metric and standard US inch diameters are manufactured in a range of OD sizes with 2, 3, 4 conductors. The 4 wire design is produced in wide or standard pattern layout in various diameters. Coil lengths of 50 to 1000 ft are typical. Metal sheath RTD cable with nickel 201 conductors is also used as sensor hook up wire in high temperature locations.
Omega RTD MI Cable can be supplied in cut to length MIC wire sections for OEM sensor and probe builders. Short straight lengths of MIC RTD MI cable from 4.25 inch to 28 inch can be cut to length CTL. Each end of the cut to length MIC can be prepared straight cut or with stripped lead lengths to match your RTD sensor probe assembly requirements.
Quick detail
Name:MI Thermocouple Cable High Temperature RTD Thermocouple Cable Thermocouple Mineral Insulated Cable
Type: Pt100,pt100,pt500...
Conductor material: Ni or Copper
Insulator: 99.6% high purity MgO
Core number:3,4,6,8
Sheath material: SS321(SS304), SS316
Dia(mm): 3.0mm to 12.7mm
Characteristics
The sheath cable are small outer diameter, quick heat responsive period, can be bent , long service life, fine air-tight, wide temperature measure range, high voltage resistant, anti-vibration, narrow mounting pipeline and can be used on bending condition.
Nominal Dimensions:
| Out Dia. | Length | Sheath Thickness | Wire Dia. |
| 3 | 90 | 0.38-0.48 | 0.38-0.42 |
| 3.2 | 90 | 0.48-0.58 | 0.39-0.43 |
| 4 | 80 | 0.52-0.62 | 0.50-0.60 |
| 4.8 | 60 | 0.73-0.83 | 0.58-0.68 |
| 5 | 50 | 0.78-0.88 | 0.60-0.70 |
| 6 | 40 | 0.98-1.08 | 0.70-0.80 |
| 6.4 | 30 | 1.05-1.15 | 0.73-0.83 |
| 8 | 20 | 1.30-1.44 | 0.80-1.10 |
Product Pictures
Company Information:
A. Main Products
B. Package
We add heat shrink tubing and plastic film to make sure high insulated resistance.
Except marking notes, we also have pass card and test report for every coil cable.
C. Mi cable Production line
We have high - quality professional products, as well as advanced product lines and equipments. All of the products comply with international quality standards and are greatly appreciated in a variety of different markets throughout the world.Along the increasing market demands, we continuously satisfy customers by updating products to improve prouduction systems, improve quality.
1. Assembly
2. Drawing
3. Annealing
4. Polishing
5. Test
6. Mi cable in stock
FAQ:
| 1. Accurate quotation. |
| 2. Confirm the price, trade term, lead time, payment term etc. |
| 3. LEADKIN sales send the Proforma Invoice with LEADKIN seal. |
| 4. Customer arranges the payment for deposit and sends us bank slip. |
| 5. Middle Production-send photos to show the production line which you can see your products in . Confirm the estimated delivery time again. |
| 6. End Production-Mass production products photos. |
| 7. Clients make payment for balance and LEADKIN ships the goods. Inform the tracking number and check the status for clients. |
| 8. The order is finished perfectly when you receive the goods and get satisfied with them . |
| 9. Feedback to LEADKIN about quality, service, market feedback & suggestion. And we will do better . |
